15 Watt |
 |
|
|
| ELIMO |
15 |
4 |
G |
I |
X |
| |
Output
Power
Watt |
No.Of
Poles |
Pinion Type
G-Gear Pinion
S-Standard Pinion |
I-Induction Motor
R-Reversible Motor |
W- 110 VAC, 1Ph
X- 230 VAC, 1Ph.
Y- 230 VAC, 3Ph
Z- 415 VAC, 3Ph |
|
| |
SPECIFICATIONS : |
| |
|
| |
Important Note : The Motors are also available in all above Voltages with D-Shaft / Round Shaft & Output Speeds 1440 RPM and 2880 RPM. |
|
| |
|
| |
|
| |
The actual speed is 2~20 % less depending upon the load.
The product contains a built in thermal switch protector. When a motor overheats for any reason, the thermal protector opend and the motor stops.
When the motor temperature drops, the thermal protector closes and the motor restarts.
Be sure that the motor off before inspecting.
Characteristics, specifications and dimensions subjected to change without notice. |
|
| |
|
| |
|
| |
Mass: Motor- 1 Kg, Gearbox-500 Gms.
|
|
|
| |
|
| |
CONNECTION DIAGRAMS : |
Single Phase Motors |
| |
|
Make sure connections as shown to
rotate the motor in clockwise direction
To change the direction, flip CW to CCW |
Short Black wires and connect as shown
to rotate the motor in clockwise direction
To change the direction, flip CW to CCW |
Red wires are for running winding &
Black wires are for Starting winding.
To change the direction interchange
Black wires or red wires. |
|
| |
Note :
When motors are running, a voltage of twice the motor power supply voltage is applied across the terminals of the capacitor.
The terminals must therefore be insulated to ensure safety. It is recommended to use a capacitor cover to insulate the terminals. |
|
| |
Three Phase Motors |
| |
|
To Change the direction, interchange any two wires between 1,2 & 3 |
To Change the direction, interchange any two wires between 1,2 & 3 |
To Change the direction, interchange any two wires between 1,2 & 3 |
|
| |
Change the direction of the motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the after some time. |
|
